Wednesday, June 10, 2009

Re: [Geopriv] Datum field changes in RFC 3825bis (affecting Sections 2, 2.1 and 6.2)

Hi Bernard,

 

I think that you have these back to front.  The version tags need to go in the MSB, so that old versions using the LSBs aren't affected.  Other than that, I think that it's OK.

 

Is it worth pointing out that the version tags can change anything, including the length of the entire option?

 

--Martin

 

From: Bernard Aboba [mailto:bernard_aboba@hotmail.com]
Sent: Thursday, 11 June 2009 2:25 PM
To: jmpolk@cisco.com; rbarnes@bbn.com; mlinsner@cisco.com
Cc: Thomson, Martin; geopriv@ietf.org
Subject: Datum field changes in RFC 3825bis (affecting Sections 2, 2.1 and 6.2)

 

Can someone enter a ticket for this?

Below are the proposed changes.  Please review.  The -01 strawman with these
changes is available here:
http://www.drizzle.com/~aboba/GEOPRIV/draft-ietf-geopriv-rfc3825bis-01.txt

In Section 2, change:

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |   Code 123    |      16       |   LaRes   |     Latitude      +
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                Latitude (cont'd)              |    LoRes  |   +
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                             Longitude                         |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |   AT  |   AltRes  |                Altitude                   |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |  Alt (cont'd) |     Datum     |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

To:

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |   Code 123    |      16       |   LaRes   |     Latitude      +
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                Latitude (cont'd)              |    LoRes  |   +
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                             Longitude                         |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |   AT  |   AltRes  |                Altitude                   |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |  Alt (cont'd) |Datum| Res |Ver|
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


In Section 2.1, change:

   The Datum byte has 256 possibilities, of which 3 have been registered

To:

   The Datum field is 3 bits, providing 8 possibilities, of which 3 have
   been registered

At the end of Section 2.1 add:

   The Res field which is 3 bits, is reserved.  These bits have been
   used by [IEEE-802.11y], but are not defined within this
   specification.

   The Ver field is two bits, and represents a version field, providing
   for 4 potential versions.

In Section 6.2, add:

[IEEE-802.11y]
          Information technology - Telecommunications and information
          exchange between systems - Local and metropolitan area
          networks - Specific requirements - Part 11: Wireless LAN
          Medium Access Control (MAC) and Physical Layer (PHY)
          specifications Amendment 3: 3650-3700 MHz Operation in USA,
          November 2008.


> Date: Wed, 10 Jun 2009 15:56:49 -0500
> To: Bernard_Aboba@hotmail.com; rbarnes@bbn.com; mlinsner@cisco.com
> From: jmpolk@cisco.com
> Subject: RE: Text for 3825bis
> CC: Martin.Thomson@andrew.com
>
> Bernard
>
> I assume you can make the edits about splitting the datum field into
> 3 parts, as I don't see that as controversial, and I think you have
> much of the idea from Richard, and can look in section 2 of
> http://www.ietf.org/internet-drafts/draft-polk-geopriv-3825-update-00.txt
> for how the datum field is being broken up.
>
> James




------------------------------------------------------------------------------------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.  
If you have received it in error, please notify the sender
immediately and delete the original.  Any unauthorized use of
this email is prohibited.
------------------------------------------------------------------------------------------------
[mf2]